TaylorMade P770 2024
Players irons · 9 clubs · global market · replaces taylormade-p770-2022
A players' iron with slightly strong lofts. Built for workability and feedback. Off-center strikes lose more distance than a cavity-back would.
Modeled 7-iron carry
148 yd
typical 15–30 handicap · 33° loft
HCP
CalculatedThis set is built for a <5 handicap; the numbers below are shown for a typical 15–30 handicap — change it to match your game.
CalculatedForgiveness tested
CalculatedDispersion extrapolated
Modeled ball flight
Flight — 7
CalculatedModeled by the GOTRECA flight model from loft and length at a 15–30 handicap (82.0 mph 7-iron), then checked against PGA Tour averages. Not a manufacturer or measured value.
| Club | Ball speed | Launch angle | Backspin | Apex height | Landing angle | Carry | Total distance |
|---|---|---|---|---|---|---|---|
| 131.2 mph | 13.9° | 3,486 rpm | 96 ft | 44.6° | 202 yd | 204 yd | |
| 125.7 mph | 16.1° | 4,153 rpm | 103 ft | 47.3° | 189 yd | 190 yd | |
| 119.8 mph | 18.6° | 4,907 rpm | 108 ft | 49.2° | 174 yd | 174 yd | |
| 114.1 mph | 20.7° | 5,456 rpm | 107 ft | 49.9° | 160 yd | 161 yd | |
| 108.1 mph | 22.6° | 5,951 rpm | 103 ft | 50.2° | 148 yd | 148 yd | |
| 102.2 mph | 24.6° | 6,414 rpm | 98 ft | 50.5° | 136 yd | 136 yd | |
| 96.6 mph | 26.6° | 6,848 rpm | 93 ft | 50.7° | 125 yd | 125 yd | |
| 92.2 mph | 29.0° | 7,487 rpm | 93 ft | 51.6° | 116 yd | 116 yd | |
| 87.2 mph | 32.2° | 8,322 rpm | 92 ft | 52.9° | 105 yd | 105 yd |
Carry gaps between clubs
P770
414
515
613
713
812
911
PW9
AW11
Factory specs
| Club | Loft | Lie | Length | Offset | SW (steel) | SW (graphite) |
|---|---|---|---|---|---|---|
| 3 | 19.0° | 60.5° | 39.00″ | 3.6 mm Estimated | D2 | — |
| 4 | 22.0° | 61.0° | 38.50″ | 3.3 mm Estimated | D2 | — |
| 5 | 25.5° | 61.5° | 38.00″ | 3.0 mm Estimated | D2 | — |
| 6 | 29.0° | 62.0° | 37.50″ | 2.7 mm Estimated | D2 | — |
| 7 | 33.0° | 62.5° | 37.00″ | 2.4 mm Estimated | D2 | — |
| 8 | 37.0° | 63.0° | 36.50″ | 2.2 mm Estimated | D2 | — |
| 9 | 41.0° | 63.5° | 36.00″ | 1.9 mm Estimated | D2 | — |
| PW(W_45) | 45.0° | 64.0° | 35.75″ | 1.6 mm Estimated | D3 | — |
| AW(W_50) | 50.0° | 64.0° | 35.50″ | 1.6 mm Estimated | D3 | — |