TaylorMade P790 2025
Players distance irons · 8 clubs · global market · replaces taylormade-p790-2023
A players-distance iron with strong lofts. More ball speed and forgiveness than a blade, more control than a game-improvement set.
Modeled 7-iron carry
155 yd
typical 15–30 handicap · 30° loft
HCP
CalculatedThis set is built for a 5–15 handicap; the numbers below are shown for a typical 15–30 handicap — change it to match your game.
CalculatedForgiveness tested
CalculatedDispersion extrapolated
Modeled ball flight
Flight — 7
CalculatedModeled by the GOTRECA flight model from loft and length at a 15–30 handicap (82.0 mph 7-iron), then checked against PGA Tour averages. Not a manufacturer or measured value.
| Club | Ball speed | Launch angle | Backspin | Apex height | Landing angle | Carry | Total distance |
|---|---|---|---|---|---|---|---|
| 127.4 mph | 15.4° | 3,450 rpm | 97 ft | 45.2° | 195 yd | 197 yd | |
| 121.9 mph | 17.7° | 4,057 rpm | 104 ft | 47.7° | 181 yd | 182 yd | |
| 116.2 mph | 19.9° | 4,589 rpm | 105 ft | 48.9° | 167 yd | 168 yd | |
| 110.5 mph | 21.6° | 4,959 rpm | 101 ft | 49.2° | 155 yd | 155 yd | |
| 104.6 mph | 23.6° | 5,413 rpm | 98 ft | 49.7° | 143 yd | 143 yd | |
| 98.1 mph | 26.5° | 6,045 rpm | 96 ft | 50.7° | 129 yd | 129 yd | |
| 93.0 mph | 29.8° | 6,859 rpm | 97 ft | 52.3° | 117 yd | 117 yd | |
| 88.0 mph | 33.2° | 7,649 rpm | 96 ft | 53.7° | 106 yd | 106 yd |
Carry gaps between clubs
P790
514
614
712
813
914
PW12
AW11
Factory specs
| Club | Loft | Lie | Length | Offset | SW (steel) | SW (graphite) |
|---|---|---|---|---|---|---|
| 4 | 20.0° | 61.0° | 38.50″ | 3.4 mm Estimated | D2 | D0 |
| 5 | 23.0° | 61.5° | 38.00″ | 3.1 mm Estimated | D2 | D0 |
| 6 | 26.5° | 62.0° | 37.50″ | 2.9 mm Estimated | D2 | D0 |
| 7 | 30.0° | 62.5° | 37.00″ | 2.7 mm Estimated | D2 | D0 |
| 8 | 34.0° | 63.0° | 36.50″ | 2.4 mm Estimated | D2 | D0 |
| 9 | 39.0° | 63.5° | 36.00″ | 2.1 mm Estimated | D2 | D0 |
| PW(W_44) | 44.0° | 64.0° | 35.75″ | 1.8 mm Estimated | D3 | D1 |
| AW(W_49) | 49.0° | 64.0° | 35.50″ | 1.6 mm Estimated | D3 | D1 |